Wireless Instrument Receiver Set - freePORT - Electric Guitars, Drum, Music, Saxophone
$249.95
General Description
Sturdiness, excellent sound and wide dynamics are among the impressive features of the freePORT Instrument Set. It consists of a bodypack transmitter with an evolution wireless locking connector, instrument cable and a diversity receiver, and is ideally suited for electric guitars and other instruments with 1/4” outputs.
Features
- 4 switchable UHF frequencies for interference-free reception
- Absolutely safe transmission
- Diversity Technology for highest reception quality
- Adjustable Squelch for undisturbed operation
- Receivers built in robust metal housing
- Dynamic processor for cristal-clear sound
Delivery Includes
- SK 2 bodypack transmitter
- Jack plug cable
- Power supply
- User manual
- EM 1 diversity receiver
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at
www.fcc.gov/cgb/wirelessmicrophones.
Wireless Instrument Receiver Set - freePORT - Electric Guitars, Drum, Music, Saxophone
$249.95
Technical Data
| Audio output level (balanced) |
XLR, +16 dBu |
| Audio output level (unbalanced) |
Jack, +10 dBu |
| Dimensions (bodypack transmitter) |
2.3 x 4 x 1.2 in. (60 x 100 x 30 mm) w/ clip |
| Dimensions (receiver) |
1.4 x 8.4 x 3.9 in. (35 x 213 x 98 mm) |
| Frequency response |
80 - 16,000 Hz |
| Operating time |
10 h. |
| Power supply |
12 VDC nom |
| Power supply (bodypack transmitter) |
9V PP3 |
| RF frequency range |
UHF |
| RF output power |
10 mW |
| Signal-to-noise-ratio |
95 dB(A) |
| Switching bandwidth |
2 MHz |
| Total harmonic distortion (THD) |
< 1% |
| Transmission/receiving frequencies |
4 |
| Weight (bodypack transmitter) |
3.2 oz. (90 g) w/o battery |
| Weight (receiver) |
16.6 oz. (570 g) |
Wireless Instrument Receiver Set - freePORT - Electric Guitars, Drum, Music, Saxophone
$249.95
Recommended Accessories
| Part/Accessory |
Article No. |
Wireless Instrument Receiver Set - freePORT - Electric Guitars, Drum, Music, Saxophone
$249.95
Variants
$249.95
Glossary
| Audio output level (balanced) |
| Logarithmic value of the audio output voltage based on a standard reference value. A balanced circuit or connection uses separate signal lines for sending a signal, returning the signal and ground (3-pole connection). |
| Audio output level (unbalanced) |
| Logarithmic value of the audio output voltage based on a standard reference value. An unbalanced circuit or connection uses the ground connection (or screening) to return the signal (2-pole connection). |
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| Operating time |
| States how long a unit can be continuously used with one set of batteries / rechargeable accupack. |
| Power supply |
| Description of the power source used for powering a unit, for example mains, battery, rechargeable accupack, etc. |
| Power supply (bodypack transmitter) |
| Description of the power source used for powering a unit, for example mains, battery, rechargeable accupack, etc. |
| RF frequency range |
| The range of frequencies to which a unit (e.g. a receiver) can be tuned. |
| RF output power |
| Output power measured at the antenna socket. |
| Switching bandwidth |
| The frequency band in which frequencies can be switched directly. |
| Total harmonic distortion (THD) |
| Total harmonic distortion is a measure of non-linear harmonic distortion and is given in %. Non-linear harmonic distortions are signals which were not present in the original before the signal was converted by the headphones. These unwanted signals are caused by the diaphragm, whose movements do not precisely move in time with the electric signals that cause it to move. Unfortunately, this is a feature of all electroacoustic transducers. Although it cannot be completely eliminated, suitable steps can be taken to minimise it. However, the user is not interested in why this distortion takes place but in how great the level of distortion must be for it to become perceptible. According to the findings of several research projects, a total harmonic distortion of 1% in the frequency range of 100 to 2000 Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies at 10%. |
