wireless lavalier microphones
General Description
The ME 102 modular mini-microphone capsule fulfills professional demands for sound quality and rugged handling, and is suitable for all areas of live work where a small and unobtrusive microphone is needed for vocal and speech applications. Scratch resistant matte finish: anthracite or nickel.
Features
- Excellent speech clarity
- Gently falling frequency response curve at low frequencies ensures good rejection of handling and wind noise
- Minimal inherent self-noise
- Omni-directional or cardioid microphone capsules, can be quickly interchanged
- Optionally available with right-angle plug (copper wire cable, extremely insensitive to handling noise) or with straight plug (steel wire cable, very resistant to tearing)
- Connectors available in straight black, straight beige, right-angle black, right-angle gray
wireless lavalier microphones
Technical Data
| Current consumption |
Approx. 250 μA |
| Dimensions |
d .2 x .5 in. (6 x 12 mm) |
| Equivalent noise level |
21 dB |
| Equivalent noise level |
33 dB |
| Min. terminating impedance |
4,700 Ω |
| Nominal impedance |
1,000 Ω |
| Pick-up pattern |
Omni-directional |
| Sensitivity in free field, no load (1kHz) |
10 mV/Pa ± 2.5 dB |
| Weight w/o cable |
.03 oz. (1 g) |
wireless lavalier microphones
Recommended Accessories
| Part/Accessory |
Article No. |
| KA 100 |
USKA100-SEC |
Monaural cable to connect 2 silhouettes to IR receiver, 2.5mm phone plug
|
| MZ 100 |
004226 |
Accessory kit for MKE102/104 with MZQ222, MZQ222-NI, MZQ100-ANT, MZQ100-GR, ZH100-ANT, ZH100-GR and case
|
| MZW 102-ANT |
038579 |
steel mesh windscreen for ME102 (black)
|
| MZW 102-NI |
038703 |
steel mesh windscreen for ME102 (nickel)
|
| NB 2 |
004398 |
head mic adapter designed for the unobtrusive application of MKE2 or MKE102/104
|
| ZH100-ANT |
047957 |
pin clip for MKE102, MKE104, MKE105 - black
|
wireless lavalier microphones
Variants
Glossary
| Equivalent noise level |
| The output signal of every microphone always includes a low noise signal in addition to the useful signal. In order to illustrate the extent of the noise voltage, it is given as a fictitious sound pressure level. In an ideally noise-free microphone, a sound pressure level of this magnitude would result in an output voltage of the magnitude of the noise. Self-noise is measured and weighted either in accordance with CCIR 468-3 or – in order to assimilate the measured result with the listening impression of the human ear – in accordance with DIN/IEC 651 (so-called A-weighted). Studio condenser microphones generally have an equivalent noise level of between 20 and 30 dB (CCIR) or between 10 and 20 dB(A). |
| Equivalent noise level |
| The output signal of every microphone always includes a low noise signal in addition to the useful signal. In order to illustrate the extent of the noise voltage, it is given as a fictitious sound pressure level. In an ideally noise-free microphone, a sound pressure level of this magnitude would result in an output voltage of the magnitude of the noise. Self-noise is measured and weighted either in accordance with CCIR 468-3 or – in order to assimilate the measured result with the listening impression of the human ear – in accordance with DIN/IEC 651 (so-called A-weighted). Studio condenser microphones generally have an equivalent noise level of between 20 and 30 dB (CCIR) or between 10 and 20 dB(A). |
| Min. terminating impedance |
| Impedance at which the connected unit meets the specified technical data. If the unit is connected to a lower impedance, it will usually have a lower output voltage or a greater distortion. |
| Nominal impedance |
| See impedance. |
| Pick-up pattern |
| Also known as polar pattern, directivity. According to their acoustic design, microphones differ in their sensitivity towards sound from different directions. Pressure microphones have a sensitivity that is largely independent of direction (omni-directional pick-up pattern). Pressure gradient microphones have the pick-up patterns wide cardioid, cardioid, super-cardioid or figure-of-eight. Interference microphones can be used to achieve a further concentration of the pick-up pattern (lobar pick-up pattern). As a special case, dummy head microphones achieve the pick-up pattern of the human ear/head (dummy head stereo). |
| Sensitivity in free field, no load (1kHz) |
| Voltage measured at the unloaded output of a microphone which is exposed to a sound pressure of 1 Pa and a frequency of 1 kHz in an anechoic chamber. |
