headworn wireless microphone, high Audioquality, neckband
General Description
Headworn microphone featuring very lightweight design and superlative audio quality. Permanently polarized MKE platinum condenser capsule with omni-directional polar pattern designed for professional "hands free" applications. The adjustable neckband is visually unobtrusive and very comfortable to wear. HSP2 is available in black or beige, and can be ordered with connector for 3000 & 5000 series wireless, evolution wireless, or without connector (stripped and tinned leads). Includes modular snap-on cable and hard carrying case.
Features
- Individually adjustable to all head sizes
- Neckband design keeps the microphone clear from shirt-collar or clothing
- Extremely thin microphone boom (Ø 1.1 mm), can be attached to the left or right side
- Microphone boom is adjustable in length and angle
- Patented Umbrella Diaphragm protects the microphone against sweat
- Connection cable can easily be interchanged
- All metal parts coated in a physical vapor deposition process
- Can also be used with the cardioid HSP4 boom microphone
Delivery Includes
- Boom microphone
- Neckband
- Clips for attaching the microphone boom
- Connection cable
- Plastic transport case, foam-lined with cut-outs
- Caps for altering the frequency response
- Operating instructions
headworn wireless microphone, high Audioquality, neckband
Technical Data
| Cable length |
5.2 ft. (1.6 m) |
| Current consumption |
Approx. 250 μA |
| Diameter |
1.1 mm boom arm |
| Diameter |
4.8 mm microphone head |
| Equivalent noise level |
28 dB(A) |
| Frequency response |
20 - 20,000 Hz |
| Max. sound pressure level (passive) |
150 dB |
| Min. terminating impedance |
4,700 Ω |
| Nominal impedance |
(@ 1 kHz) 1,000 Ω |
| Operating voltage (stand alone) |
4.5-15 V |
| Polar pattern |
Omni-directional |
| Sensitivity in free field, no load (1kHz) |
2 mV/Pa |
| Weight |
0.2 oz. (6.5 g) (without cable) |
headworn wireless microphone, high Audioquality, neckband
Recommended Accessories
| Part/Accessory |
Article No. |
headworn wireless microphone, high Audioquality, neckband
Variants
| HSP 2-M |
|
Model #500694 |
MSRP: $825.00 |
| HSP 2 with shorter microphone boom and smaller neckband. Distinguishing features of HSP 2 and HSP 2-M |
| HSP 2-3 |
|
Model #009863 |
MSRP: $825.00 |
| Beige, thin connection cable with 3-pin lockable special connector. Suitable for Sennheiser SK 50, SK 250, SK 5012, SK 5212 and SK 3063 bodypack transmitters. For wired applications, the headmic can be used with the intelligent MZA 900 P-4 phantom power adapter. |
| HSP 2-3-5 |
|
Model #009869 |
MSRP: $825.00 |
| Beige, steel wire cable with open ends. |
| HSP 2-3-5-M |
|
Model #500689 |
MSRP: $825.00 |
| HSP 2-3-5 with shorter microphone boom and smaller neckband. |
| HSP 2-3-M |
|
Model #500690 |
MSRP: $825.00 |
| HSP 2-3 with shorter microphone boom and smaller neckband. |
| HSP 2-5 |
|
Model #009868 |
MSRP: $825.00 |
| Black, steel wire cable with open ends. |
| HSP 2-5-M |
|
Model #500691 |
MSRP: $825.00 |
| HSP 2-5 with shorter microphone boom and smaller neckband. |
| HSP 2-EW |
|
Model #009866 |
MSRP: $825.00 |
| Black, steel wire cable with 3.5 mm mini-jack. Suitable for Sennheiser SK 100, SK 300 and SK 500 evolution wireless series bodypack transmitters. For wired applications, the headmic can be used with the intelligent MZA 900 P phantom power adapter. |
| HSP 2-EW-3 |
|
Model #009872 |
MSRP: $825.00 |
| Beige, steel wire cable with 3.5 mm mini-jack. Suitable for Sennheiser SK 100, SK 300 and SK 500 evolution wireless series bodypack transmitters. For wired applications, the headmic can be used with the intelligent MZA 900 P phantom power adapter. |
| HSP 2-ew-3-M |
|
Model #500692 |
MSRP: $825.00 |
| HSP 2-ew-3 with shorter microphone boom and smaller neckband. |
| HSP 2-ew-M |
|
Model #500693 |
MSRP: $825.00 |
| HSP 2-ew with shorter microphone boom and smaller neckband. |
Glossary
| Cable length |
| The cable length is usually measured between the anti-kink sleeves of the cable (cable length without connectors). |
| Diameter |
| Refers to the outer diameter of a microphone etc. |
| Diameter |
| Refers to the outer diameter of a microphone etc. |
| Equivalent noise level |
| The output signal of every microphone always includes a low noise signal in addition to the useful signal. In order to illustrate the extent of the noise voltage, it is given as a fictitious sound pressure level. In an ideally noise-free microphone, a sound pressure level of this magnitude would result in an output voltage of the magnitude of the noise. Self-noise is measured and weighted either in accordance with CCIR 468-3 or – in order to assimilate the measured result with the listening impression of the human ear – in accordance with DIN/IEC 651 (so-called A-weighted). Studio condenser microphones generally have an equivalent noise level of between 20 and 30 dB (CCIR) or between 10 and 20 dB(A). |
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| Min. terminating impedance |
| Impedance at which the connected unit meets the specified technical data. If the unit is connected to a lower impedance, it will usually have a lower output voltage or a greater distortion. |
| Nominal impedance |
| See impedance. |
| Operating voltage (stand alone) |
| Voltage type and level required for powering a unit. |
| Sensitivity in free field, no load (1kHz) |
| Voltage measured at the unloaded output of a microphone which is exposed to a sound pressure of 1 Pa and a frequency of 1 kHz in an anechoic chamber. |
