Microphone Transmitter - Wired Mic / Wireles Mic -
$799.95
General Description
Practically any wired microphone can be a player in Sennheiser’s 2000 ensemble. This plug-on transmitter makes it possible. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for all components in the 2000 series. The transmitter settings on SKP 2000 can also be synchronized quickly and easily using infrared technology. Equipped with triple switchable transmission power and phantom powering, SKP 2000 is incredibly versatile.
Features
- Rugged metal housing
- Up to 75 MHz switching bandwidth
- 20 fixed frequency bands with up to 64 compatible presets
- 6 banks each with up to 64 tunable channels
- Frequency setting in 25 kHz steps
- Pilot tone squelch for interference-free operation
- 48 V switchable phantom powering
- Backlit display on transmitter (keystroke activation)
- Auto-lock feature to prevent buttons from accidently being pressed
- Audio and RF MUTE feature for muting the transmitterTransmitters can be configured from the receiver menu
- Can be synchronized with the receiver using infrared interface
- Wide range of accessories for virtually any use
Delivery Includes
- SKP 2000 plug-on transmitter
- POP 1 protective pouch
- 2 AA 1.5 V batteries
- Instruction manual
- Supplementary frequency sheet
- Supplementary RF power sheet
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at
www.fcc.gov/cgb/wirelessmicrophones.
Microphone Transmitter - Wired Mic / Wireles Mic -
$799.95
Technical Data
| Modulation |
FM |
| RF frequency range |
516 - 865 MHz |
| Carrier frequency |
max. 3,000 |
| Switching bandwidth |
max. 75 MHz |
| RF output power |
100 mW |
| Nominal deviation |
±24 kHz |
| Peak deviation |
±48 kHz |
| Compander |
HDX |
| Frequency response |
80 - 18,000 Hz |
| Total harmonic distortion (THD) |
< 0.9% |
| Signal-to-noise-ratio |
≥ 120 dBA (@ 1 mV peak deviation) |
| In compliance with |
CE, FCC, IC |
| XLR connector |
XLR-3 female |
| Battery |
2 x 1.5 V (AA) |
| Operating time (transmitter) |
> 8 h (P48: 5h) |
| Input voltage range |
mic 1.2 V max |
| Dimensions (transmitter) |
105 x 43 x 43 mm |
| Weight (transmitter) |
195 g |
Microphone Transmitter - Wired Mic / Wireles Mic -
$799.95
Recommended Accessories
| Part/Accessory |
Article No. |
Microphone Transmitter - Wired Mic / Wireles Mic -
$799.95
Variants
| SKP 2000-XP-A |
|
Model #504051 |
$799.95 |
| Plug-on transmitter (516 - 558 MHz) |
| SKP 2000-XP-B |
|
Model #504053 |
$799.95 |
| Plug-on transmitter (626 - 698 MHz) |
| SKP 2000-XP-G |
|
Model #504052 |
$799.95 |
| Plug-on transmitter (558 - 626 MHz) |
$799.95
Glossary
| Compander |
| Also known as noise reduction system. A system which improves the signal-to-noise ratio by compressing the dynamics on the transmitter side using a compressor, and subsequently restores the normal dynamics on the receiver side using an expander. |
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| In compliance with |
| Gives the guidelines and requirements which have to be met before a unit can be put onto the market. Such guidelines are published by e.g. standards committees, telecommunications authorities etc. |
| Input voltage range |
| Indicates the voltage range of the input signal within which a unit will work properly, i.e. as specified in its technical data. |
| Modulation |
| The process in which one wave is varied by some parameter of another wave, for example, an RF carrier frequency that is modulated by an audio signal. Types of modulation include amplitude modulation, frequency modulation, pulse code modulation and pulse width modulation. |
| Nominal deviation |
| Also known as reference deviation. The nominal deviation has been fixed at 40kHz to be able to give comparable technical data. |
| Peak deviation |
| Maximum permissible deviation for FM. |
| RF frequency range |
| The range of frequencies to which a unit (e.g. a receiver) can be tuned. |
| RF output power |
| Output power measured at the antenna socket. |
| Switching bandwidth |
| The frequency band in which frequencies can be switched directly. |
| Total harmonic distortion (THD) |
| Total harmonic distortion is a measure of non-linear harmonic distortion and is given in %. Non-linear harmonic distortions are signals which were not present in the original before the signal was converted by the headphones. These unwanted signals are caused by the diaphragm, whose movements do not precisely move in time with the electric signals that cause it to move. Unfortunately, this is a feature of all electroacoustic transducers. Although it cannot be completely eliminated, suitable steps can be taken to minimise it. However, the user is not interested in why this distortion takes place but in how great the level of distortion must be for it to become perceptible. According to the findings of several research projects, a total harmonic distortion of 1% in the frequency range of 100 to 2000 Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies at 10%. |
| XLR connector |
| Most common form of connector in audio studio technology. |
