Quickfinder

Professional Audio

Wireless Microphone Systems
Wired Microphones
Conference Systems
Tour Guide Systems
Audiology Solutions
Aviation Headsets
Professional
Headphones & Headsets

e 914 - Sennheiser USA

Article No. 500206

Description
Technical Data
Accessories

Zoom +

Condenser Microphone - Instrument Microphone

$399.95

General Description

The e 914 is a high-grade condenser microphone for very demanding applications. Its outstanding sound properties qualify it for highly sophisticated applications such as acoustic guitars, cymbals, percussion, overhead, orchestras and grand pianos.

Features

Exceptionally lively, clear sound
Three-position sensitivity switch
Three-position bass roll-off/cut-off switch
Very high sound pressure handling capability
Exchangeable capsule

Delivery Includes

e 914 microphone
Microphone clamp
Windscreen
Pouch
User manual

Condenser Microphone - Instrument Microphone

$399.95

Technical Data

Attenuation	0, -10, -20 dB
Dimensions	0.9 x 6.2 in. (24 x 157 mm)
Equivalent noise level	19 dB(A)
Frequency response	20 - 20,000 Hz
Max. Sound pressure level (active)	137, 147, 157 dB
Min. terminating impedance	1,000 Ω
Nominal impedance	100 Ω
Phantom powering	48 V/2.2 mA
Pick-up pattern	Cardioid
Sensitivity in free field, no load (1kHz)	7 mV/Pa
Weight	7 oz. (198 g.)

Print Top

Zoom +

Condenser Microphone - Instrument Microphone

$399.95

Recommended Accessories

Part/Accessory	Article No.
MZQ 100	002155
resilient quick release stand adapter for 19-23mm (~3/4"- 7/8") diameter microphones and E609

Print Top

Zoom +

Condenser Microphone - Instrument Microphone

$399.95

Variants

Print Top

Condenser Studio Microphone, Condenser Boundary Microphone - evolution 900 series -

$399.95

Print Top

$399.95

Print Top

$399.95

Glossary

Attenuation

A reduction in volume. Opposite of "amplification".

Equivalent noise level

The output signal of every microphone always includes a low noise signal in addition to the useful signal. In order to illustrate the extent of the noise voltage, it is given as a fictitious sound pressure level. In an ideally noise-free microphone, a sound pressure level of this magnitude would result in an output voltage of the magnitude of the noise. Self-noise is measured and weighted either in accordance with CCIR 468-3 or – in order to assimilate the measured result with the listening impression of the human ear – in accordance with DIN/IEC 651 (so-called A-weighted). Studio condenser microphones generally have an equivalent noise level of between 20 and 30 dB (CCIR) or between 10 and 20 dB(A).

Frequency response

The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz.

Max. Sound pressure level (active)

The maximum sound pressure a unit can reproduce before a given THD is reached.

Min. terminating impedance

Impedance at which the connected unit meets the specified technical data. If the unit is connected to a lower impedance, it will usually have a lower output voltage or a greater distortion.

Nominal impedance

See impedance.

Phantom powering

Almost all studio microphones are supplied with 48V ±4V phantom power (P48, IEC 268-15). This supply voltage is applied to both modulation lines, while the return current flows via the cable screen. Some microphones can also be powered by batteries or from plug-in mains adapters.

Pick-up pattern

Also known as polar pattern, directivity. According to their acoustic design, microphones differ in their sensitivity towards sound from different directions. Pressure microphones have a sensitivity that is largely independent of direction (omni-directional pick-up pattern). Pressure gradient microphones have the pick-up patterns wide cardioid, cardioid, super-cardioid or figure-of-eight. Interference microphones can be used to achieve a further concentration of the pick-up pattern (lobar pick-up pattern). As a special case, dummy head microphones achieve the pick-up pattern of the human ear/head (dummy head stereo).

Sensitivity in free field, no load (1kHz)

Voltage measured at the unloaded output of a microphone which is exposed to a sound pressure of 1 Pa and a frequency of 1 kHz in an anechoic chamber.

Print Top

$399.95

More Product Information

Product Downloads
Glossary

Purchase Information

More Information

Featured Links
Parts Store
Events
Contact Us
Dealer Locator
Technical Specifications
Counterfeit Alert

Professional Audio

e 914 - Sennheiser USA

Article No. 500206

Condenser Microphone - Instrument Microphone

$399.95

General Description

Features

Delivery Includes

Related Products

e 912

Condenser Microphone - Instrument Microphone

$399.95

Technical Data

Condenser Microphone - Instrument Microphone

$399.95

Recommended Accessories

Condenser Microphone - Instrument Microphone

$399.95

Variants

$399.95

$399.95

$399.95

Glossary

$399.95

More Product Information

Purchase Information

More Information