microphone contact table, conference, meeting
General Description
The digital SDC 8200 D delegate unit is an ideal choice for both mobile and fixed conference systems. Its compact and elegant design harmoniously blends in with any conference room. The unit features a high-quality built-in loudspeaker, providing excellent sound at a pleasant volume. By pressing the Mic key, the conference participants can either switch on the microphone or signal their request to speak. Three voting keys allowing electronic voting: Yes, Abstention, No (+,0,-).
Features
- Built-in high-quality loudspeaker (automatically muted when the microphone is switched on)
- Microphone on/off (request) key
- Three voting keys: Yes, Abstention, No (+,0,-)
- Gooseneck microphone with red LED ring
- Two 3.5 mm headphone jacks for headphones or induction couplers for the hearing impaired
- Two separate headphone volume controls
Delivery Includes
microphone contact table, conference, meeting
Technical Data
| Color |
Pantone Black 7C |
| Dimensions |
5.9 x 3.1 x 7.3 in. (150 x 80 x 185 mm) |
| Frequency response |
100 - 14,000 Hz |
| Goose neck length |
15 in. (380 mm) |
| Connector (headphones) |
3.5 mm mono (>32 O) |
| Housing |
ABS |
| Operating temperature |
+5 - +50°C |
| Pick-up pattern |
Cardioid |
| Power consumption |
max. 2.5 W |
| Standards |
IEC 849 |
| Voltage |
48 V DC |
| Weight |
1.2 lbs. (560 g) |
microphone contact table, conference, meeting
Recommended Accessories
| Part/Accessory |
Article No. |
| SDC 8000 Software |
SDC8000Software |
Software to control, operate the SDC8000 conference / interpretation system
|
| SDC 8200 S-DM |
500977 |
Software module for delegate management with the SDC8200 system
|
| SDC 8200 S-IM |
500980 |
Software module for interpreter management with the SDC8200 system
|
| SDC 8200 S-MM |
500976 |
Software module for microphone management with the SDC8200 system
|
| SDC 8200 S-VM |
500978 |
Software module for voting management with SDC8200 system
|
| SDC 8200 SYS |
500975 |
configuration and control software for the SDC8200 conference and interpretation system
|
| SDC 8200 SYS-M |
500969 |
configuration and control software for SDC8200 CU-M for small and midsize conferences
|
microphone contact table, conference, meeting
Variants
Glossary
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| Goose neck length |
| Overall length of an goose neck from microphone head to the other end for fastening |
| Housing |
| Gives the width (in inches) and/or the height (in units) of a housing. |
| Operating temperature |
| Gives the range of temperatures at which a unit can be operated without damage. |
| Pick-up pattern |
| Also known as polar pattern, directivity. According to their acoustic design, microphones differ in their sensitivity towards sound from different directions. Pressure microphones have a sensitivity that is largely independent of direction (omni-directional pick-up pattern). Pressure gradient microphones have the pick-up patterns wide cardioid, cardioid, super-cardioid or figure-of-eight. Interference microphones can be used to achieve a further concentration of the pick-up pattern (lobar pick-up pattern). As a special case, dummy head microphones achieve the pick-up pattern of the human ear/head (dummy head stereo). |
| Standards |
| Standards which apply for a product |
