Conference Systems - Equipment - Infrared Receiver Multi-Channel
$485.95
General Description
The EKI 1029 is a slim multi-channel receiver for narrow-band applications. It is powered by an environmentally friendly accupack and can be used with headphones, stethoset headphones, earphones or induction couplers. The EKI 1029 is fitted with a squelch and has an energy-saving function.
Features
- Multi-channel bodypack receiver
- Narrow-band
- Powered by BA 1029 accupack, can be recharged in the receiver
- Squelch
- Energy-saving circuitry
- Headphone socket (3.5 mm mono jack) with on/off function
- 16 channel (K 0 - K 15)
Delivery Includes
- EKI 1029 multi-channel receiver
- BA 1029 accupack
Conference Systems - Equipment - Infrared Receiver Multi-Channel
$485.95
Technical Data
| Carrier frequency |
55 - 1,335 kHz |
| Connector (headphones) |
3.5 mm mono |
| Impedance |
25 Ω |
| Modulation |
FM |
| Operating time |
30 h. |
| Power supply |
BA 1029, 2.5 V, 170 mAh |
| Weight |
3.5 oz. (100 g) |
Conference Systems - Equipment - Infrared Receiver Multi-Channel
$485.95
Recommended Accessories
| Part/Accessory |
Article No. |
| BA 1029 |
003708 |
Replacement battery for EKI 1029 (1.0 oz)
|
| EZI 120 |
003448 |
Silhouette induction coil for use with hearing aids with telecoils - requires cables HZL30-6 or HZL32-6 for RR820, RI810-S, RI250-J, RI250S receivers, and KA100-SEC or KAB100-SEC for RI100-J
|
| EZT 100 |
003457 |
Induction neckloop for use with hearing aids with telecoils, 2.5mm mono phone plug for use with RI100-J
|
| EZT 1011 |
001954 |
Induction neckloop for use with hearing aids with telecoils, 3.5mm phone plug for RR820-S, RI810-S, RI250-J, and RI250-S
|
Conference Systems - Equipment - Infrared Receiver Multi-Channel
$485.95
Variants
| EKI 1029-PLL16-H |
|
Model #004622 |
$485.95 |
| Multi-channel bodypack receiver for narrowband applications, channels 16-31 |
 |
$485.95
Glossary
| Impedance |
| Impedance expresses the AC resistance of a microphone or a set of headphones. It is dependent on frequency and is given at 1 kHz as the so-called nominal impedance. Impedance is measured in ohms. In recent years, an industrial standard has developed, setting the impedance of headphones at 50 or 600 ohms. Sennheiser headphones are manufactured according to this standard, thus practically ruling out connection problems. With microphones, the input impedance of the following microphone amplifier should have at least three times the value of the nominal impedance, in order to prevent it from unnecessarily attenuating the microphone signal. |
| Modulation |
| The process in which one wave is varied by some parameter of another wave, for example, an RF carrier frequency that is modulated by an audio signal. Types of modulation include amplitude modulation, frequency modulation, pulse code modulation and pulse width modulation. |
| Operating time |
| States how long a unit can be continuously used with one set of batteries / rechargeable accupack. |
| Power supply |
| Description of the power source used for powering a unit, for example mains, battery, rechargeable accupack, etc. |
