Gooseneck Microphones - Condenser Microphone Head
$152.95
General Description
The ME 35 is a back-electret condenser microphone head for use with the Sennheiser MZH goosenecks. This capsule achieves optimum isolation and is suitable for a very wide range of applications including: conference, public address, studio, broadcast, video and others.
Features
- A super cardioid capsule providing a high degree of isolation.
- Element based on legendary KE10 capsule, used in Sennheiser's celebrated MKE 40 lavalier and MKE 44P stereo microphones.
- All contact points are gold plated and corrosion resistant, insuring maintainence-free long term operation
- Available as ME 35 Nx in non-reflective Nextel® gray
Delivery Includes
Gooseneck Microphones - Condenser Microphone Head
$152.95
Technical Data
| Acoustics |
Pressure gradient transducer |
| Dimensions |
ø12 x L18 mm |
| Equivalent noise level |
26 dB(A) |
| Frequency response |
50 Hz – 20 kHz |
| Impedance |
50 Ω |
| Min. terminating impedance |
1 kΩ |
| Pick-up pattern |
Super-cardioid |
| Power supply |
P12 - P48 |
| Weight |
Approx. 3 oz |
Gooseneck Microphones - Condenser Microphone Head
$152.95
Recommended Accessories
| Part/Accessory |
Article No. |
| MZC 30 |
005088 |
1.1mm cable (9 m / 29.5 ft.) with integrated pre-amp for use with ME 34, ME 35 or ME 36 capsules. For use with the MZH 30 for hanging applications, or the MZBD36 for boundary microphone applications.
|
| MZH 30 |
005090 |
metal ceiling mount for the ME34, ME35, ME36 microphones, use with MZC30 cable
|
| MZT 30 |
005085 |
XLR flange mount socket for permanent installation. Requires 24..21mm diameter hole
|
| MZTX 30 B |
005083 |
|
| MZTX 31 PTT |
500457 |
Table stand for operating MZH3015, MZH3040, MZH3042, MZH3062, and MZH3072 goosenecks.
|
| MZTX 31 PTT Nx |
500815 |
Table stand for operating MZH3015, MZH3040, MZH3042, MZH3062, and MZH3072 goosenecks with push-to-talk button, 3 pin XLR connectors, non-reflective Nextel® gray
|
| MZW 34 |
005067 |
upgrade velour windscreen for ME34 and ME35
|
Gooseneck Microphones - Condenser Microphone Head
$152.95
Variants
| ME 35 Nx |
|
Model #500817 |
$187.95 |
| ME 35 in non-reflective Nextel® gray. |
 |
| ME 35 W |
|
Model #005064 |
$152.95 |
| ME 35 in white. |
 |
$152.95
Glossary
| Acoustics |
| The science of sound. |
| Equivalent noise level |
| The output signal of every microphone always includes a low noise signal in addition to the useful signal. In order to illustrate the extent of the noise voltage, it is given as a fictitious sound pressure level. In an ideally noise-free microphone, a sound pressure level of this magnitude would result in an output voltage of the magnitude of the noise. Self-noise is measured and weighted either in accordance with CCIR 468-3 or – in order to assimilate the measured result with the listening impression of the human ear – in accordance with DIN/IEC 651 (so-called A-weighted). Studio condenser microphones generally have an equivalent noise level of between 20 and 30 dB (CCIR) or between 10 and 20 dB(A). |
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| Impedance |
| Impedance expresses the AC resistance of a microphone or a set of headphones. It is dependent on frequency and is given at 1 kHz as the so-called nominal impedance. Impedance is measured in ohms. In recent years, an industrial standard has developed, setting the impedance of headphones at 50 or 600 ohms. Sennheiser headphones are manufactured according to this standard, thus practically ruling out connection problems. With microphones, the input impedance of the following microphone amplifier should have at least three times the value of the nominal impedance, in order to prevent it from unnecessarily attenuating the microphone signal. |
| Min. terminating impedance |
| Impedance at which the connected unit meets the specified technical data. If the unit is connected to a lower impedance, it will usually have a lower output voltage or a greater distortion. |
| Pick-up pattern |
| Also known as polar pattern, directivity. According to their acoustic design, microphones differ in their sensitivity towards sound from different directions. Pressure microphones have a sensitivity that is largely independent of direction (omni-directional pick-up pattern). Pressure gradient microphones have the pick-up patterns wide cardioid, cardioid, super-cardioid or figure-of-eight. Interference microphones can be used to achieve a further concentration of the pick-up pattern (lobar pick-up pattern). As a special case, dummy head microphones achieve the pick-up pattern of the human ear/head (dummy head stereo). |
| Power supply |
| Description of the power source used for powering a unit, for example mains, battery, rechargeable accupack, etc. |
