Key Features
- In-line microphone
- Sennheiser sound quality
- Isolate against ambient noise
- Direct connection to Apple iPhone
stereo headset for apple iPhone
MSRP:$129.95
stereo headset for apple iPhone
MSRP:$129.95
General Description
The MM 50 iP headset is tailormade for the iPhone and iPod. Thanks to Sennheiser’s expertise as a global leader in electro acoustics, the headset reproduces outstanding, professional quality stereo acoustics for optimum listening and communication enjoyment.
*iPod and iPhone are registered brands of Apple Computer, Inc. in the USA and other countries.
Features
- Choose your ideal size ear sleeve for an optimum fit and get high isolation against environmental noise as well as a very good bass response
- Natural sound reproduction and high dynamics
- Integrated in-line microphone with multi-function button
- 3,5 mm mini jack, 4-poled
- 2-year guarantee
- Multi-function button answers/ends/toggles calls & starts/pauses/resumes music playback
- *only purchase from an authorized dealer* see our dealer locator, and cross reference our non-authorized list (here)
Delivery Includes
- 3 ear sleeves (small, medium, large)
stereo headset for apple iPhone
MSRP:$129.95
Technical Data
| Cable length |
3.3-4.3 ft. (1-1.3 m) asymmetric |
| Characteristic SPL |
106 dB |
| Color |
Black with chrome |
| Connector |
3.5 mm jack (4-pole) |
| Ear coupling |
In-the-ear |
| Frequency range |
18 - 22,000 Hz |
| Frequency range |
80 - 15,000 Hz |
| Impedance |
16 Ω |
| Pick-up pattern |
Omni-directional |
| Sensitivity as per 121 TR 9-5 |
-44 dBv/Pa |
stereo headset for apple iPhone
MSRP:$129.95
Recommended Accessories
| Part/Accessory |
Article No. |
stereo headset for apple iPhone
MSRP:$129.95
Variants
| MM 50 iP-W |
Model #502886 |
MSRP: $129.95 |
| Ear-canal, sound isolating stereo headset with iPhone connector and in-line mic. Available in white or black. |
stereo headset for apple iPhone
MSRP:$129.95
stereo headset for apple iPhone
MSRP:$129.95
Glossary
| Cable length |
| The cable length is usually measured between the anti-kink sleeves of the cable (cable length without connectors). |
| Connector |
| A standardised single or multi-pole plug for connecting units or accessories. |
| Ear coupling |
| A distinction is made between headphones which are worn on the external ear (supra-aural) and those which surround the ear (circumaural). Open headphones have foam ear pads that rest on the ears or ring pads that surround the ears. Closed headphones, on the other hand, nearly always have circumaural ear pads. |
| Impedance |
| Impedance expresses the AC resistance of a microphone or a set of headphones. It is dependent on frequency and is given at 1 kHz as the so-called nominal impedance. Impedance is measured in ohms. In recent years, an industrial standard has developed, setting the impedance of headphones at 50 or 600 ohms. Sennheiser headphones are manufactured according to this standard, thus practically ruling out connection problems. With microphones, the input impedance of the following microphone amplifier should have at least three times the value of the nominal impedance, in order to prevent it from unnecessarily attenuating the microphone signal. |
| Pick-up pattern |
| Also known as polar pattern, directivity. According to their acoustic design, microphones differ in their sensitivity towards sound from different directions. Pressure microphones have a sensitivity that is largely independent of direction (omni-directional pick-up pattern). Pressure gradient microphones have the pick-up patterns wide cardioid, cardioid, super-cardioid or figure-of-eight. Interference microphones can be used to achieve a further concentration of the pick-up pattern (lobar pick-up pattern). As a special case, dummy head microphones achieve the pick-up pattern of the human ear/head (dummy head stereo). |
| Sensitivity as per 121 TR 9-5 |
| Sensitivity as specified in the regulations issued by the Luftfahrtbundesamt (German aviation authorities). |
