Key Features
- KLEER audio transmission
- Remote charging capability
- Completely wireless portable audio system
- "Twist-to-Fit" design eliminates "falling earbuds"
wireless audio headphones, wireless earphones
wireless audio headphones, wireless earphones
General Description
The revolutionary MX W1 features unheralded wireless audio reproduction. Using the KLEER™ audio technology, the MX W1 delivers completely wireless stereo sound in perfect time and phase to the two remote receivers. Using a Twist-To-Fit design and high quality transducer, the KLEER™ audio transmission delivers CD-quality sound reproduction without fidelity-robbing audio compression. The MX W1 features a sophisticated and tech-oriented design and includes a compact docking station that can charge the earbuds up to 3 times remotely without tapping a power source.
Awards
Editor's Choice Award |
"EISA Best Headphone Award", 2008-2009 |
Features
- KLEER™ Wireless transmission for uncompressed, full bandwidth audio reproduction
- Completely wireless solution; unteathered Left/Right headphones and transmitter
- Connect up to 2 stereo sets to one transmitter
- Docking station serves as a remote charging station (up to 3 charges)
- Twist-to-Fit system (see diagram in downloads section) locks the headphones in place
- Newly developed 14mm transducer from the Sennheiser Ireland clean-room
- Simple-to-use; plug & play design
- Headphones may bypass included transmitter to connect to other KLEER devices
Delivery Includes
- (2) wireless earphones (right/left)
- Transmitter with 1/8" stereo plug
- Docking station with case for charging
- Multi-country power adaptor
- USB charging cable
- Set of foam earpads
- Set of 3 elastic transmitter attachment straps
- Set of Twist-to-Fit adapters (S/M/L)
- User manual
wireless audio headphones, wireless earphones
Technical Data
| Frequency response |
19 Hz - 20,000 Hz |
| Range |
Approx. 32.8 ft. (10 m) in open area |
| Sound pressure level (SPL) |
115 dB |
| Charging time |
Approx. 2 hrs (from empty battery to full charge) |
| Weight |
Approx. 0.35 oz.(10 g) each |
| Operating time |
Approx. 3-4 hrs |
| Battery |
Built-in rechargeable battery (Lithium-ion, 3.7 V / 40 mAh) |
| Impedance |
32 ohms |
| Cable length |
3.9 inches (transmitter only) |
| ISM band coexistence |
Dynamic Channel Selection (16 channels) |
| Carrier frequency |
2.40-2.48 GHz |
| Jack plug |
1/8 |
| Radiated power |
<2 mW |
| Receiver charging cycle |
Up to 3 times from fully charged docking station battery (On-the-move) |
| S/N |
>80 dB |
| Total harmonic distortion (THD) |
<0.5% at 1 kHz with nominal output of 100 dB SPL |
| Transducer principle |
Dynamic |
| UPC code |
615104143913 |
| EAN code |
4044156030135 |
| Dimensions (single) |
3.25 x 6.25 x 7.75 inches |
| Weight (single) |
1.5 lbs |
| Dimensions (master carton) |
21.8 x 14.0 x 20.87 inches |
| Weight (master carton) |
20.00 |
| Master carton quantity |
12 |
wireless audio headphones, wireless earphones
Recommended Accessories
| Part/Accessory |
Article No. |
wireless audio headphones, wireless earphones
Variants
Glossary
| Frequency response |
| The frequency response of a microphone is given within the limits defined by the manufacturer. In studio condenser microphones it is generally within the range of between 20 Hz and 20 kHz. |
| Range |
| See RF wireless headphones, transmission loss. |
| Sound pressure level (SPL) |
| Due to the impractical numerical values, the sound pressure is usually given as the logarithmic value of the sound pressure level according to the equation: dB SPL = 20 x log (po / 0.00002 Pa). The abbreviation SPL (sound pressure level) is added in order to make a clear distinction from other uses of dB. The reference sound pressure, which is at the same time the threshold of hearing, is then 0 dB SPL. The threshold of pain is 140 dB SPL. A difference in the sound pressure level of 1 dB is just about perceptible, while a doubling of the sound pressure corresponds to 6 dB and a doubling of the volume corresponds to a rise of 10 dB.
|
| Charging time |
| The time required to recharge a Sennheiser accupack. After recharging, automatic chargers will automatically switch to trickle charging. |
| Operating time |
| States how long a unit can be continuously used with one set of batteries / rechargeable accupack. |
| Impedance |
| Impedance expresses the AC resistance of a microphone or a set of headphones. It is dependent on frequency and is given at 1 kHz as the so-called nominal impedance. Impedance is measured in ohms. In recent years, an industrial standard has developed, setting the impedance of headphones at 50 or 600 ohms. Sennheiser headphones are manufactured according to this standard, thus practically ruling out connection problems. With microphones, the input impedance of the following microphone amplifier should have at least three times the value of the nominal impedance, in order to prevent it from unnecessarily attenuating the microphone signal. |
| Cable length |
| The cable length is usually measured between the anti-kink sleeves of the cable (cable length without connectors). |
| Jack plug |
| A common audio connector in consumer electronics and music industry. Available in various diameters; in the hi-fi segment, 1/8" and ¼" are widely used. Poles range from one to four. (Examples: headphone jack or jack of an electric guitar). |
| Transducer principle |
| Two transducer principles have become established for the conversion of electric energy into mechanical energy: electrodynamic and electrostatic transducers, whereby the latter is only to be found in audiophile systems, due to their relatively high manufacturing costs. Electrodynamic transducers basically consist of a ring-shaped permanent magnet and an oscillation coil, which is fixed to the receiver diaphragm. When an audio-frequency alternating current is passed through the oscillation coil, it is caused to vibrate in accordance with the audio-frequency alternating current, thus causing the diaphragm to vibrate in the same way. |