1.) Why am I not getting enough audio/volume output?
Check the microphone sensitivity setting on the transmitter, it may be set too low (see owners manual, page 70).
2.) When the transmitter is turned off, I get A loud static noise from my loud speakers.
The squelch threshold setting may be set to low or of f " 0Db". Increase the setting to 5-15dB (see owners manual, page 71).
3.) Why is my Evolution Wireless noisy even when the transmitter is off?
4.) My Evolution Wireless doesn't have any range, if I move greater than 10 feet away from the receiver, it mutes.
You have adjusted your squelch level too high, it should be no higher than 05 or 10. If a higher squelch level is required, it means that you are operating on an active TV channel. (See answer above).
5.) I can't get enough output from my Evolution Wireless, what could be wrong?
The sensitivity adjustment on the transmitter is adjusted too low, it is factory set at "-30 dB". Follow the directions in your owner's manual and readjust.
6.) My system has drop outs/poor range/mutes. What’s wrong?
The squelch threshold may be set to high (20 to 40dB). Typical setting is 5 to 15 dB, any higher will reduce range (see owners manual, page 71).