Headworn Vocal Microphone - Headworn Mics Stage and Broadcast use
$419.95
General Description
The Ear Set 1 features excellent speech intelligibility and clear, pleasant trebles. It is insensitive to pop and wind noise and has a capsule diameter of only 3.3 mm. The Ear Set 1 uses the proven acoustics of the MKE 1 clip-on microphone. This high-quality microphone has been designed for stage and broadcast use, where it ensures optimum sound and hands-free freedom of movement. The ear bow and mic boom can be easily adapted to the shape of the ear and face. The Ear Set is available with LEMO or 3.5 mm jack plugs for use with the 2000, 3000 and 5000 Series as well as evolution wireless bodypacks. Thanks to a modular design, the components of the ear-worn microphones are easily interchangeable.
Features
- Compatible with all Sennheiser wireless microphone systems
- Cable is insensitive to structure-borne noise
- Modular design: all system components are easily interchangeable
- Very small dimensions
- Insensitive to the penetration of sweat and moisture
- High maximum sound pressure level and excellent speech intelligibility
- Based on the proven acoustics of the MKE 1 sub-miniature clipon Microphone
- Transparent and skin-friendly hypoallergenic adhesive tape (included in delivery) ensures a perfect fit of the microphone boom even during strong movements and provides strain relief for the cable
Delivery Includes
- Ear-worn microphone
- MZQ 02 cable clip
- Connection cable with silicone tube
- MZC 1-1 frequency response cap, small
- MZC 1-2 frequency response cap, large
- Set adhesive tape
- Plastic transport case
- Instruction manual
Headworn Vocal Microphone - Headworn Mics Stage and Broadcast use
$419.95
Technical Data
| Frequency response |
20 - 20,000 Hz ± 3 dB |
| Pick-up pattern (Headset microphone) |
omni-directional |
| Nominal impedance |
1 kΩ |
| Sensitivity in free field, no load (1kHz) |
5 mV/Pa ± 2.5 dB (at 1 kHz) |
| Diameter |
3.3 mm (boom arm) |
| Max. sound pressure level (passive) |
143 dB |
| Equivalent noise level |
27 dB |
| Current consumption |
approx 240 μA |
| Operating voltage (stand alone) |
4.5 - 15 V |
| Operating temperature |
-10 °C up to +50 °C |
| Cable length |
1.6 m |
| Diameter |
1.1 mm (boom arm) |
| Weight w/o cable |
0.1 oz (2.3 g) |
Headworn Vocal Microphone - Headworn Mics Stage and Broadcast use
$419.95
Recommended Accessories
| Part/Accessory |
Article No. |
| MZA 900 P |
500226 |
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor.
The phantom power adaptor is available in two different versions:
MZA 900 P with lockable 3.5 mm jack socket (as evolution wireless)
MZA 900 P-4 with lockable 3-pin special socket
The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and wireless applications. One and the same microphone can be used together with the MZA 900 P(-4) for wired applications (e.g. in the studio) or with a transmitter of the evolution series for wireless applications.
The MZA 900 P can also be used as a cable tester for XLR microphone cables.
|
| MZW 01-BE |
521726 |
MZW 01 windshield, beige
|
| MZW 01-BL |
521724 |
MZW 01 windshield, black
|
| MZW 02-BE |
514524 |
MZW 02 foam windshield, beige
|
| MZW 02-BL |
536809 |
MZW 02 foam windshield, black
|
Headworn Vocal Microphone - Headworn Mics Stage and Broadcast use
$419.95
Variants
| Ear Set 1-4 |
|
Model #504230 |
$419.95 |
| Black with 3-pin special connector |
| Ear Set 1-4-3 |
|
Model #504231 |
$419.95 |
| Beige with 3-pin special connector |
| Ear Set 1-ew |
|
Model #504232 |
$399.95 |
| Black with screw-on 3.5mm jack plug |
| Ear Set 1-ew-3 |
|
Model #504233 |
$399.95 |
| Beige with screw-on 3.5mm jack plug |
