Personal Audio
HD 25-SP II - Sennheiser USA
Article No. 502103
Key Features
- Tough, detachable cable
- Lightweight and comfortable
- High maximum sound pressure level
- For monitoring & outdoor broadcast
DJ Headphones - Closed Headphones with Noise Reduction
$129.95
Related product
$129.95
General Description
The HD 25-SP II closed dynamic headphones are ideal for monitoring, recording and live sound/ENG. A lower-cost alternative to the HD 25 II, the HD 25-SP II features a simpler headband and a slightly different capsule design for thick, explosive low-end with very aggressive noise isolation. The low impedance headphone is very easy to drive with excellent volume even from low output audio sources like MP3 players and smartphones.
What the experts are saying:
"Never a dull moment with the Sennheiser HD 25 SP headphones! with replaceable parts and sound quality at its best its a must for all DJ's!" -Harry Bizzle, DJ
Features
- Very lightweight and comfortable, even if used for long periods
- High maximum sound pressure level
- 85 Ohm nominal impedance for universal compatibility
- Tough, detachable steel cable
- Neodymium ferrous magnet systems and lightweight aluminium/copper voice
- Built-tough with a 2 YEAR warranty!
- Compatible (listen only) with latest generation of tablets
Delivery Includes
- 1 HD 25-SP II
$129.95
Technical Data
| Cable length | Approx 10 ft. (3 m) |
| Contact pressure | Approx. 3 N supraaural |
| Ear coupling | On-the-ear |
| Frequency response (headphones) | 30 - 16,000 Hz |
| Jack plug | 3.5/6.3 mm stereo |
| Load rating | 200 mW stereo |
| Max. sound pressure level (active) | 114 dB (1 kHz, 1 Vrms) |
| Nominal impedance | 60 Ω |
| Total harmonic distortion (THD) | <0.4% dynamic, closed |
| Transducer principle | Dynamic, closed |
| Weight w/o cable | 4.1 oz. (115 g) |
| UPC | 615104132122 |
| EAN | 4044156020976 |
$129.95
Recommended Accessories
| Part/Accessory | Article No. |
| Ear cushion | 069417 |
|
Velour ear cushion with foam disk, pair |
|
| Ear cushions | 075527 |
|
Donut style leatherette cushions for HME/HMEC25 series (also fits HME/HMEC45) |
|
| Headphone element | 068158 |
|
Headphone element with housing, 65Ω |
|
| HH 10 | 510615 |
|
Headphone holder for all over-the-head style headphones. ships with any new HD485 or HD595. |
|
| HZL 25 | 040180 |
|
Replacement cable for HD25-1, terminates in right angle 3.5mm phone plug with adapter to 6.5mm. |
|
| Padded headband | 051771 |
|
Padded headband for HD25-SP |
|
| Plug adapter | 543684 |
|
Threaded 3.5mm to 6.5mm phone plug adapter |
|
Glossary
| Cable length |
| The cable length is usually measured between the anti-kink sleeves of the cable (cable length without connectors). |
| Contact pressure |
| The wearing comfort of a set of headphones is determined not only by its weight but also by the force with which the earpieces are pressed onto the ears. This force is given in newtons (N), whereby 1 N corresponds to the compressive force which a mass of about 100 g exerts on a solid surface. The DIN Standard 45500 Part 10 limits the maximum permissible contact force to 5 N. Values of between 1.3 and 4 N are common, although lower values apply for open headphones. Higher values can be found in the case of closed headphones. Here, a higher contact pressure is required in order to achieve sufficient sealing, which is important for the reproduction of low frequencies. |
| Ear coupling |
| A distinction is made between headphones which are worn on the external ear (supra-aural) and those which surround the ear (circumaural). Open headphones have foam ear pads that rest on the ears or ring pads that surround the ears. Closed headphones, on the other hand, nearly always have circumaural ear pads. |
| Frequency response (headphones) |
| The frequency response of a pair of headphones is given within limits defined by the manufacturer. |
| Jack plug |
| A common audio connector in consumer electronics and music industry. Available in various diameters; in the hi-fi segment, 1/8" and ¼" are widely used. Poles range from one to four. (Examples: headphone jack or jack of an electric guitar). |
| Load rating |
| The load rating is the amount of electric power which - according to the manufacturer“s specifications - can be continuously supplied to a set of headphones over a period of time without causing damage. According to DIN 45500 Part 10, the load rating must be at least 100 mW. Testing is carried out using a special noise signal which is supplied to the headphones over a period of 100 hours. |
| Max. sound pressure level (active) |
| The maximum sound pressure a unit can reproduce before a given THD is reached. |
| Nominal impedance |
| See impedance. |
| Total harmonic distortion (THD) |
| Total harmonic distortion is a measure of non-linear harmonic distortion and is given in %. Non-linear harmonic distortions are signals which were not present in the original before the signal was converted by the headphones. These unwanted signals are caused by the diaphragm, whose movements do not precisely move in time with the electric signals that cause it to move. Unfortunately, this is a feature of all electroacoustic transducers. Although it cannot be completely eliminated, suitable steps can be taken to minimise it. However, the user is not interested in why this distortion takes place but in how great the level of distortion must be for it to become perceptible. According to the findings of several research projects, a total harmonic distortion of 1% in the frequency range of 100 to 2000 Hz is imperceptible. Below 100 Hz, the perceptibility threshold lies at 10%. |
| Transducer principle |
| Two transducer principles have become established for the conversion of electric energy into mechanical energy: electrodynamic and electrostatic transducers, whereby the latter is only to be found in audiophile systems, due to their relatively high manufacturing costs. Electrodynamic transducers basically consist of a ring-shaped permanent magnet and an oscillation coil, which is fixed to the receiver diaphragm. When an audio-frequency alternating current is passed through the oscillation coil, it is caused to vibrate in accordance with the audio-frequency alternating current, thus causing the diaphragm to vibrate in the same way. |
